Child Lock - ETNA CM125HRVS Mode D'emploi

CONTROLS

Child lock

programme.
In the display you will see the selected programme.
2. Press the start button.
The selected programme is now confirmed.
3. Turn the control dial to set the weight.
In the display you will see the set weight.
4. Press the start button again.
The microwave switches on and the set time counts down in
the display. Various symbols flash in the display.
• When the set time has been reached, the current time
appears again in the display, and you will hear 5 beeps.
Please note: when you select A8 (Cake), don't immediately place
the cake in the microwave. The oven first pre-heats to 180 °C.
A double-beep signal indicates when the oven is at temperature.
Place the cake in the microwave and press the start button.
You can 'lock' your combi-microwave so that starting the combi-
microwave is no longer possible.
Please note: the child lock can only be switched on if the combi-
microwave is not switched on. The current time is visible in the
display.
1. Press for 3 seconds on the stop button.
A long beep sounds and the child lock symbol appears in the
display. The child lock is activated.
2. Press again for 3 seconds on the stop button to switch off the
child lock again.
A long beep sounds and the child lock symbol disappears from
the display.
EN 17