EINHELL GC-MT 3036 Mode D'emploi D'origine page 18

2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
•
Safety instructions
3. Proper use
The machine is designed for digging over beds
and fi elds. Be sure to observe the restrictions in
the additional safety instructions.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_GC_MT_3036_SPK1.indb 18 Anl_GC_MT_3036_SPK1.indb 18
GB
4. Technical data
Engine: ........................ 4-stroke engine, 139 ccm
Engine rating: .................................. 3 kW / (4) hp
Engine working speed: ......................... 3600 rpm
Working width: ............................................36 cm
Hoe blade diameter: ...................................26 cm
Forward gear: .................................................... 1
Starting system: ....................... Reversing starter
Fuel: .............................. Regular unleaded petrol
Engine oil: ......................... approx. 0.6 l (10W30)
Tank capacity: .................................. approx. 2.2 l
Vibration a : ............................................6.1 m/s
hv
K uncertainty ...........................................1.5 m/s
Weight: ........................................................34 kg
Spark plug: ............................................. LG F6TC
L sound pressure level ........................ 84 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 95 dB(A)
WA
5. Before starting the equipment
Assembling the guard plate and the transport
wheel
1. Arrange the components properly as descri-
bed in section 2.1 Layout.
2. Fit the transport wheel (5) to the engine/gear
unit (1) as shown in Fig. 3c.
3. Fit the spring (11) and the small split pin (12)
as shown in Fig. 3d.
Assembling the cultivator blades and the
depth stop
1. Arrange the components properly as descri-
bed in section 2.1 Layout.
2. Fit the depth stop (15) as shown in Fig. 4b
and secure in position with the large split pin
(16). We recommend securing the depth stop
in the middle position of the 3 possible posi-
tions when you begin your work. If you want
to change the working depth, move the depth
stop by sliding it up or down.
- 18 -
2
2
04.08.2015 13:09:29 04.08.2015 13:09:29