Fracarro SIG7404 Instructions D'emploi page 17

Click on "Operate" and the following window will be displayed:
Check that in the "IP Address" there is the IP address of the SIG7404 module.
Confirm all settings by clicking "OK".
By default, the IP address of the SIG7404 module is as follows:
192.168.0.136
Description of the fields within the window "Video Parameters" :
Video Brightness: video output brightness.
Video Contrast: video output contrast.
Video Hue: video output hue.
Video Saturation: video output saturation.
Video File Mode: standard video output (Auto, PAL, NTSC).
Video Resolution: video output resolution.
17