Fracarro SIG7404 Instructions D'emploi page 14

Select the video resolution (5 video resolutions can be selected: D1, ¾ D1, 2/3 D1, SIF o HD1):
1.1.3 Resolution
D1
Set Brightness, Contrast, Saturation and Hue:
1.1.4 Brightness
88(0x58)
1.1.5 Contrast
145(0x91)
1.1.6 Saturation
137(0x89)
1.1.7 Hue
0(0x00)
4.4 Audio setting (1.2 Audio Setting)
To modify the digits:
press ENTER to change the parameter; use the LEFT/RIGHT arrows to select the digit you want to change; use
the LEFT/RIGHT arrows to change the value; press ENTER to confirm and save the new parameter value.
To modify the parameters:
press ENTER to change the parameter; use the LEFT/RIGHT arrows to select the value you want, press ENTER
to confirm and save the new parameter value.
4.4.1 Audio bitrate (1.2.1 Audio Bitrate)
Enter the 1.2.1 Audio Bitrate menu and select the bit rate you want (3 bitrates are available: 128kbps, 256kbps,
384kbps):
1.2.1 Audio Bitrate
384 kbps
4.4.2 Audio Sampling frequency (1.2.2 Audio Smpl Frq)
Enter the 1.2.2 Audio Smpl Frq menu and select the audio sampling frequency you want (3 audio sampling
frequencies are available: 32.0 KHz, 44.1 KHz, 48.0 KHz):
1.2.2 Audio Smpl Frq
48 kHz
4.4.3 Layer setting (1.2.3 Audio Layer)
Enter the 1.2.3 Audio Layer menu and select the Layer you want (Layer 1 or Layer 2):
4.4.4 Audio Mode (1.2.4 Audio ES Mode)
Enter the 1.2.4 Audio ES Mode menu and select the audio type (4 audio types are available, such as STEREO,
SINGLE CHANNEL, DUAL CHANNEL, JOINT STEREO):
1.2.3 Audio Layer
Layer1 *Layer2
14