LaserLiner PrecisionPlane-Laser 3G Pro Mode D'emploi page 18

Alignment with
free-moving base
1.
2.
4
Horizontal and vertical levelling
Switch the laser device on. The automatic sensor is now active and will level
the laser device automatically. As soon as device-levelling is completed and
the auto LED illuminates continuously, horizontal or vertical object levelling
can be carried out. Maximum accuracy is attained when device-levelling is
completed.
Lasers can be switched on and off individually with the H or V buttons
(press buttons briefly).
The laser lines flash when the device is outside the automatic levelling
!
range of 2°. Position the device such that it is within the levelling
range.
18
EN
Alignment with
vernier adjustment
3.