baltur BTL14 Mode D'emploi page 19

ONE STAGE LIGHT OIL BURNERS
N° 0002934100
INSTALLING ON BOYLER
Rev. 10/02/2004
1) Lock the flange B on the tube of the burner via the supplied screw A and nut C (n° 2 x BTL 20).
2) Position the insulating seal E on the tube, interposing the cord F between flange and seal.
3) Finally, fix the burner to the boiler via the 4 stud bolts and relative nuts (supplied).
N.B. Make sure the tube penetrates into the combustion chamber as per the boiler manufacturer's
instructions.
17