Husqvarna FS5000 D Manuel D'utilisation page 11

Blade guard
The blade guard is a protective cover for the top part of
the cutting blade. It gives protection if parts from a
damaged cutting blade or other objects eject in the
direction of the operator. The blade guard prevents
injury from the cutting blade. The blade guard is also a
part of the water cooling system that keeps the cutting
blade cool during operation.
To do a check of the blade guard
• Make sure that the blade guard is correctly installed.
To install a blade guard on page 17 .
Refer to
• Examine the blade guard for damages, such as
cracks.
• Replace a damaged blade guard.
• Replace the blade guard if it is hit, bent or has other
defects.
• Examine the blade guard lock for damages.
• Make sure that the blade guard lock is correctly
engaged.
Protective covers
Missing or damaged protective covers increase the risk
of injury on moving parts and hot surfaces.
1143 - 002 - 08.07.2019
To do a check of the protective covers
• Do a check of the protective covers before you
operate the product.
• Make sure that the protective covers are correctly
attached and do not have cracks or other damages.
• Replace damaged protective covers.
Muffler
The muffler keeps the noise levels to a minimum and
sends the exhaust fumes away from the operator.
11