TRENDnet TEW-639GR 2.01 Guide D'installation Rapide page 10

Note: The example below is for WPA2-PSK security. If you select WPA-PSK or
WPA2-PSK, make sure your wireless adapters support WPA2 or WPA. If your wireless
adapters do not support WPA or WPA2, then select WEP.
6. Select the desired WPA mode, enter characters
for your Pre-Shared key and then click Apply.
For WPA-PSK or WPA2-PSK, the Pre-Shared
Key must be between 8 and 63 ASCII or 64
HEX characters. Make sure to copy down the
Pre-Shared Key.
7. Open up your browser and enter in a URL (e.g.
www.trendnet.com) to verify that you have
Internet connection.
Your Installation is complete
For detailed information regarding the TEW-639GR's configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or
TRENDnet's website at http://www.trendnet.com.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
Thank you for choosing TRENDnet
www.trendnet.com/register
8