Start; Preparation Time; Interrupt Or End Tanning Session - ergoline PAS SION 34 SUPER POWER Instructions De Service

10/2009 1008454-00
5.3
The device is started automatically with an internal or external timer.
NOTE:
Timer instructions see separate manual (order
5.3.1
WARNING!
Wrong positioning may result in overexposure!
WARNING!
To obtain the recommended exposure schedule position of a minimum
distance of 1/2" (13 mm) measured with a standard ruler:
– Lie on acrylic surface of lounge and lower canopy. Canopy will stop at
the correct distance from lounge acrylic surface.
Before the UV lamps turn on, you have a few minutes to prepare yourself.
During the preparation time you can switch on the UV lamps at any time by
pressing the START/STOP button.
– Remove your clothes and all jewelry.
– Remove make-up and other cosmetics.
– Remove glasses. Contact lenses can be worn under the protective
goggles.
– Put on the protective goggles.
– Lie down on the bed surface.
– Close the canopy.
– Press the START/STOP button.
Settings on start-up:
UV lamps
•
• Cooling
Stereo Sound System PLUS (optional)
•
• Air condition (optional)
5.3.2
The tanning session ends automatically after the preset time has run down.
The internal fan continues to run for approx. three (3) minutes to sufficiently
cool the device.
– To interrupt a tanning session, press button START/STOP anytime
during a session.
– Press START/STOP again to restart the lamps.

Start

Preparation time

Interrupt or end tanning session

Operation
no. 0070923801-..)
Operating Instructions – 13