3. Never switch the device on if you have noticed damage to the
device itself, the cable or plug or if it does not work properly,
makes strange noises, smells odd or you can see smoke, or if it has
fallen or shows any other signs of damage. Remove the plug from
the socket immediately. Take the entire device back to your
supplier or a recognised electrician to be checked and/or repaired.
Always ask for original parts to be used.
4. The device may only be opened and/or repaired by a competent
and qualified person. Do not carry our your own repairs as this
could be dangerous! Repairs carried out by unauthorised persons or
changes made to the device could damage the dust/waterproof
capacity of the device and will nullify the guarantee and the
manufacturer's liability.
5. If the electrical cable is damaged, it must be replaced by the
manufacturer, their service department or somebody with similar
qualifications in order to prevent creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire
and/or personal injury. They will invalidate the guarantee and the
supplier, importer and/or manufacturer shall not be liable for the
consequences.
Description
1.
Main switch
2.
Mode button (MODE)
3.
Temperature & wifi
4.
Suction grilles (top side)
5.
Air discharge grille
6.
Display
12. Connection for external
temperature sensor
Remote control:
7.
ON/OFF button
8.
Mode switch (MODE)
9.
Swing=oscillate
10. Increase temperature
11. Decrease temperature
Display:
A.
Ventilation lamp
B.
Heating lamp (half power)
C.
Heating lamp (full power)
D.
"Oscillation" lamp
E.
Wifi signal found
35