Hitachi WH 12DM Instructions De Sécurité Et Mode D'emploi page 11

2. Battery Charger (UC14YF2)
Pilot Lamp
SPECIFICATIONS
1. Cordless Impact Driver
Model
No-load speed
Capacity
Tightening
torque
Bit shank size
Rechargeable
battery
Weight
2. Battery Charger (UC 14YF2)
Input power source
Charging time
Charger
Weight
Cord
WH9DM
(9.6 V)
5/32" (4 mm) – 5/16" (8 mm)(Small screw)
3/16" (M5) – 15/32" (M12)(Ordinary bolt)
3/16" (M5) – 3/8" (M10) (High tension bolt)
Maximum 840 in-lbs
{95 N·m 970 kgf·cm}
Tightening is 15/32" (M12) high
tension bolt when fully charged
at 68°F (20°C) temp.
Tightening time: 3 sec.
EB9B (2.0 Ah)
Ni-Cd battery, 9.6 V
Charging and discharging
frequency: about 1000
3.0 lbs (1.4 kg)
Single phase: AC120V 60Hz
Approx. 60min. (At a temperature of 68°F (20°C))
Charging voltage .......................... DC 7.2–14.4V
Charging current .......................... DC 1.9A
2.9 lbs (1.3kg)
Battery Installation Hole
Nameplate
Fig. 2
0 – 2300/min
Maximum 885 in-lbs
Tightening is 15/32" (M12) high
tension bolt, when fully
charged at 68°F (20°C) temp.
Tightening time: 3 sec.
1/4" (6.35 mm) Hex.
Caution Plate
Body
WH12DM
(12 V)
{100 N·m 1020 kgf·cm}
EB1220BL (2.0 Ah)
Ni-Cd battery, 12 V
Charging and discharging
frequency: about 1000
3.5 lbs (1.6 kg)
English
11