Hardware Installation - Chacon IP 34547 Guide D'utilisation

4. During the first configuration select the option "NO WIFI CONNECTION".
This will allow you to select your Wi-Fi Network and set your access password
5. Insert your Camera data written at the back of the camera and your Wi-Fi password.
a. USER: admin
b. Password: 1234
c. New password: "Your desired camera password"
d. Confirm New Password: "Previous password"
e. Network: "Your Wi-Fi connection"
f. Wi-Fi password: "Password of your internet connection"
6 Wait a few seconds and it's done.
If you take a little bit more time to setup in the previous step, the software gives you
an error. Press check your settings and press "CONNECT" again.
7. I f you wish to add another camera, go back to point 1 and follow the steps.
4

Hardware installation

1. Screw the mount on the wall with the two screws provided.
2. Loosen the thumb screws to adjust the mount to the
desired position. Once the position is set, tighten the screws
securely.
5 6
EN FR