Add A Camera - Chacon IP 34547 Guide D'utilisation

Hardware connection
AUDIO
OU T IN WPS

Add a camera

1. Open the app and press "+" to add a camera
2. Select the option Scan with "QR UID" for P2P option (you can also manually add the
UID code)
3. Scan the QR Code at the back of the IP Camera or on the «easy scan» card.
EN FR
1. Install Wi-Fi antenna and position upright.
2. Connect only the POWER to your IP Camera. (do not
use the ethernet (RJ45) cable.)
2. Wait until the camera is ready to use : the green light
ANT
DC 5V
SD
will start blinking.
3. Connect your mobile phone on the same Wi-Fi network
that you will use for the Camera
4. Download the «Chacon Cam» app from the appstore or
Google Play.
1 2
3