Bosch GLI 18V-4000 C Professional Notice Originale page 10

10 | English
The light source cannot be replaced. If the light source
u
is defective, the entire cordless worklight must be re-
placed.
Remove the batteries from the worklight before carry-
u
ing out any work on the worklight (e.g. assembly,
maintenance, etc.) as well as when transporting and
storing the worklight. There is risk of injury from unin-
tentionally pressing the on/off switch.
Do not direct the light beam at persons or animals and
u
do not stare into the light beam yourself (even from a
distance).
Do not use the worklight in road traffic. The worklight
u
is not permitted for illumination in road traffic.
Keep the minimum distance between the
cordless worklight and all illuminated sur-
faces and objects. Illuminated objects may
overheat if this distance is not maintained.
NOTE: Do not look into the light beam for pro-
longed periods. The optical radiation may harm
your eyes.
Do not cover the lamp head while the cordless work-
u
light is operating. The lamp head warms up during oper-
ation and can cause burns if this heat accumulates.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
If used incorrectly or if the battery is damaged, flam-
u
mable liquid may be ejected from the battery. Contact
with this liquid should be avoided. If contact accident-
ally occurs, rinse off with water. If the liquid comes
into contact with your eyes, seek additional medical
attention. Liquid ejected from the battery may cause ir-
ritation or burns.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
When the battery is not in use, keep it away from pa-
u
per clips, coins, keys, nails, screws or other small
metal objects that could make a connection from one
terminal to another. A short circuit between the battery
terminals may cause burns or a fire.
Do not open the battery. There is a risk of short-circuit-
u
ing.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Only charge the batteries using chargers recommen-
u
ded by the manufacturer. A charger that is suitable for
1 609 92A 632 | (18.12.2020)
one type of battery may pose a fire risk when used with a
different battery.
Never swallow button cells. Swallowing button cells can
u
result in severe internal burns and death within two
hours.
Ensure that the button cell is kept out of the
reach of children. If you suspect that
someone has swallowed a button cell or that a
button cell has entered the body in another
way, seek medical attention immediately.
Ensure that battery replacement is carried out prop-
u
erly. There is a risk of explosion.
Do not attempt to recharge the button cell and do not
u
short circuit the button cell. The button cell may leak,
explode, catch fire and cause personal injury.
Remove and dispose of drained button cells correctly.
u
Drained button cells may leak and damage the product or
cause personal injury.
Do not overheat the button cell or throw it into fire.
u
The button cell may leak, explode, catch fire and cause
personal injury.
Do not damage the button cell and or take the button
u
cell apart. The button cell may leak, explode, catch fire
and cause personal injury.
Do not allow damaged button cells to come into con-
u
tact with water. Leaking lithium may mix with water to
create hydrogen, which could cause a fire, an explosion,
or personal injury.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Ensure the cordless worklight is not operated via
u
Bluetooth unintentionally and/or without permission.
Assign a PIN via the Bosch application.
The cordless worklight features a wireless interface.
u
Local operating restrictions, e.g. in aeroplanes or hos-
pitals, must be observed.
Deactivate the wireless interface, e.g. for transport.
u
To switch off the wireless interface, remove the button
cell and battery.
Ensure the cordless worklight is not operated via
u
Bluetooth unintentionally and/or without permission.
Assign a PIN via the Bosch application.
The cordless worklight features a wireless interface.
u
Local operating restrictions, e.g. in aeroplanes or hos-
pitals, must be observed.
Deactivate the wireless interface, e.g. for transport.
u
To switch off the wireless interface, remove the button
cell and battery.
Before switching on the cordless worklight using the
u
Bosch application, ensure that you have visual contact
Bosch Power Tools