Installation And Connection - Bartscher 120.325 Mode D'emploi

5.2 Installation and connection

CAUTION!
The installation and maintenance of the appliance should only be carried out by
trained personnel!
•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of the
device.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Check that the device is connected to a grounded electrical installation.
•
When setting up the vegetable cutter, take into account the space needed for the
device, the container for cut vegetables and products to be cut.
•
Ensure sufficient space around the vegetable cutter to allow the user freedom of
movement, and for a second person to pass by.
•
The device must be in a well-lit place, with lighting that illuminates the entire work station
but does not blind the user.
•
Ventilation openings must not be blocked, in order to avoid the device overheating and
to prevent possible injury or loss.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
- 26 -