Electric Start - DeWalt DXCMH1393075 Guide D'utilisation

CAUTION: RISK FROM NOISE
WHAT CAN HAPPEN
• Under some conditions and
duration of use, noise from
this product may contribute to
hearing loss.
SAVE THESE INSTRUCTIONS FOR FUTURE
USE
HOW TO PREVENT IT
• Always wear certified safety
equipment: ANSI S12.6
(S3.19) hearing protection.
Know Your Air Compressor
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE
OPERATING YOUR UNIT. Compare the illustrations with your
unit to familiarize yourself with the location of various controls
and adjustments. Save this manual for future reference.
FEATURES

ELECTRIC START

The engine switch (C) can be placed in three
positions; START, RUN and OFF. See Starting
under Operation for complete starting
instructions.
UNLOADER VALVE
When the maximum air tank pressure is obtained, the unloader
valve (F) will blow-off. This will cause the compressor to exhaust
the air to the atmosphere and not the tank.
Manual Lock: The manual lock allows you to
manually unload the compressor with air
pressure in the air tank. To operate the manual
lock:
Rotate the manual lock unloader lever to the
open position to prevent air tank pressure
buildup. Rotate manual lock unloader lever to
the closed position after starting the engine to allow air tank pressure
to build. NOTE: Air will not build in tank when manual lock unloader
lever in the open position.
SAFETY VALVE
This valve (G) is designed to prevent system
failures by relieving pressure from the system
when the compressed air reaches a predeter-
10
C
F
F
OPEN
CLOSED
G