Buffalo FC255 Mode D'emploi page 4

UK
Operation
Connecting the head unit
The head unit is supplied as a single detachable part to
aid in cleaning the appliance.
To connect the body of the appliance with head unit:
1. Put the head unit onto the main body of the
appliance, using the tabs (A) on the rear of head unit
and the lugs (B) on the rear of the main body.
2. Lower the unit onto the main body, until the bottom
of head unit is flat with the surface of the body, and
the safety switch (C) can touch with the pin(D) on
the main body.
Connecting the Basket Handle
Care must be taken to ensure that the handle
is correctly located, and securely pulled back
in to position before being used.
1. Squeeze the two ends of the handle
together.
2. Slot the ends of the handle in to the
basket.
3. Lower the handle so that it slots over the
frame of the basket.
4
FC255_DB203_FC256_FC257_ML_A5_v2 20200318.indb 4
Element
Thermostat
Safety switch
Power switch
Heat indicator
light
Thermal Cut-out
reset switch
Reset switch cover
2020/3/18 16:45
A
C
B
D