A: Advanced Multiple Flash Shooting With Slave A, B, And C Added - Canon MACRO RING LITE MR-14EX II Mode D'emploi

a: Advanced Multiple Flash Shooting
with Slave A, B, and C Added
C
A
When C.Fn-15 is set to 1 (p.63), multiple
flash shooting can be performed not only
with slave C but also with slave A and B.
For an outline of controlling flash, see
"Slave Group Control" on page 46.
Multiple flash shooting can be performed
B
with flash tubes A and B as well as the
slave unit(s) firing at the same output, or
with only slave A or B added, regardless
of the slave's firing group settings (p.54).
Set <l> and <6>.
1
Check that the flash mode is set to
<a>.
Press the <,> button to display
<^> and <l>
<6>.
Check that <:> and <
are displayed.
Set and position slave A, B, and
2
C.
Check that the same transmission
channel is set for all slave units and
the master unit.
Set slave units as A, B, or C
respectively and place them in
position.
M >
53