Setting The Flash Ratio - Canon MACRO RING LITE MR-14EX II Mode D'emploi

l Setting the Flash RatioN
You can adjust the flash ratio between flash tubes A and B, or fire only
one of them. This can create shadows on the subject to give a more
sculptural look. The flash ratio can be set in half-stop increments as
follows: 8:1 to 1:1 to 1:8 (13 settings).
A:B = 4:1
Flash with the A:B Flash Ratio Set
Set to <l>.
1
Press the <,> button to display
<%> and <l>.
Press the <F> button.
2
Press function button 3 <F>.
The flash ratio is highlighted.
Set the flash ratio.
3
Turn <9> to set the A:B flash ratio,
then press <8>.
Flash tube B only
25