Dolmar TM-92.14 Manuel D'utilisation page 100

14
EN
b) sack or stone guard missing;
c) blades engaged;
d) no operator present;
e) gear in "neutral";
f) fault in battery charger (with engine
running).
4.7 BLADE ENGAGEMENT AND BRAKE CONTROL
The mushroom switch allows you to engage the blades using the electromagnetic
clutch:
«A» Pressed
«B» Pulled
– If you engage the blades without taking the necessary safety precautions, the
engine shuts down and cannot be restarted (
– Blade disengagement (Pos. «A»), simultaneously activates a brake which stops their
rotation in a few seconds.
4.8 CUTTING HEIGHT ADJUSTMENT LEVER
There are seven positions for this lever (shown as «1» to «7» on the label), which corre-
spond to various heights between 3 and 8 cm.
– To go from one height to another, press the release button at the end of the lever.
4.9 LEVER FOR TIPPING THE GRASS-CATCHER (
This pull-out lever tips and empties the grass-catcher. This means less work for the
operator.
= Blades disengaged
= Blades engaged
5.2).
CONTROLS AND INSTRUMENTS
c
b
a
if present)
d
e
f