Publicité
Les langues disponibles
Les langues disponibles
Rear Ducted Installation for 1 motor Rangehood
12
The Electrical Connector must be
hood to Rear Ducting mode.
Disconnect the Electrical Connector
by depressing the tabs with your
hand and also using light force on
For a rear ducting installation the
removing the 12 screws as shown.
extract the blower from the body
of the Hood and position it so the
transition opening is facing to the
Once the blower is in place re-install
the 12 screws to fasten the motor to
the Hood body.
Reconnect the Connector to the
blower.
Publicité
