SK 41 Safety Relay
Safety Relay
Relay
1.
Contents
1.
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.
3.
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.
Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.
5.1
5.2
5.3
5.4
6.
7.
7.1
7.2
7.3
7.4
8.
9.
10.
11.
12.
We reserve the right to make technical and operationally relevant changes to the
products and devices described in this documentation at any time and without prior
notice.
2. General safety regulations and protective measures
•
The manufacturer and users of the plant / machine on which the protection is being used are responsible
for implementing and following all applicable safety regulations and rules.
•
When used in conjunction with the higher-order controller, the protection guarantees functional safety,
but not the safety of the entire plant / machine. The safety of the entire plant / machine must, therefore,
be assessed before using the device.
•
The operating instructions must always be available at the place of installation of the protection.
They must be read thoroughly and observed by all persons involved in the operation, maintenance and
servicing of the protection.
Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Prerequisites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
13