Important Remark; Safety Instructions; Warranty Descriptions - Ecler NUO4 Mode D'emploi

1. IMPORTANT REMARK

1.1. Safety Instructions

In order to get the optimum operation and efficiency from your mixing unit, it is VERY IMPORTANT - before you
plug anything - to read this manual very carefully and take seriously into account all considerations specified within
it. We strongly recommend that its maintenance be carried out by our Authorised Technical Services.
This apparatus must be earthed through its mains cable.
Do not expose the unit to rain or water splashes, and do not place liquid containers or incandescent
objects like candles on top of the unit. Do not obstruct the ventilation shafts with any kind of material.
Any change in the configuration of the unit must be carried out by a qualified technician. Should any
connection / disconnection task be done, always disconnect the unit from the mains supply.

1.2. Warranty Descriptions

Your ECLER equipment has undergone exhaustive laboratory and quality control tests before leaving the factory.
Nevertheless, your may be in need of our Technical Service during the period covered by the Guarantee or
afterwards. In that case, carefully protect your equipment in its original packet and send it to our Technical Service
with the transport and insurance paid. Attach a photocopy of your Guarantee Certificate and a detailed description
of the defect you have observed.
ECLER, S.A. guarantees its ECLER products against material or fabrication defects for a ONE-YEAR period (3
YEAR period in SCLAT and NUO series mixers and in the SPM technology amplifiers and 5 YEAR in the
ETERNAL potentiometers) after the date of original purchase.
ECLER, S.A., will repair the defective equipment within the aforementioned period, with no charge for parts and
labour.
To ensure the validity of the Guarantee, it is essential that the attached Guarantee, Registration Card is filled out
correctly and remitted to your ECLER distributor, within 10 DAYS after date of purchase.
The Guarantee is non-transferrable and protects the original buyer only.
The Guarantee does not cover:
- Damages caused by mistreatment or negligent handling, lack of elementary precautions, disregard to the
instructions in the manual, faulty connection or accidents.
- Sets that have been manipulated, altered or repaired other than at the authorized Technical Service centers.
- The exterior fittings and electro-mechanical parts, nor their wear due to use.
- Shipping and insurance expenses, nor for damages the set may incur during its transport.
ECLER, S.A., will not be held responsible for any direct or indirect damage, loss or other damage originated by or
relating to the set.
This Guaranteed is valid only for repairs or services carried out at an authorized Technical Service Center.
4