Warning Labels; Laser Information; Work Area - DeWalt DW088 Guide D'utilisation

ENGLISH

Warning Labels

For your convenience and safety, the following label is on your laser.

CAUTION: LASER RADIATION - DO NOT STARE INTO THE LASER BEAM. CLASS II LASER PRODUCT.

CAUTION: CLASS 2 LASER RADIATION WHEN OPEN DO NOT STARE INTO THE BEAM.
DeWALT Industrial Tool CO.
Towson, MD 21286 USA
For service information, call
1-800-4-DeWALT
D-65510 Idstein, Germany
www.DeWALT.com
www.DeWALT.eu
www.2helpu.com
Made in China

Laser Information

The DW088 LaserChalkLine™ Laser Line Generators are Class II (2) laser products and comply with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to laser notice No. 50, dated June 24, 2007.
Introduction
The DW088 lasers are self-leveling laser tools that can be used inside and outside for horizontal (level) vertical and plumb
alignment projects.
General Safety Rules For Battery Operated Tools
WARNING! Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.

WORK AREA

• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
•
Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Use battery operated tool only with the specifically designed batteries. Use of any other batteries may create a risk of fire.
Battery
This tool is powered by three 1.5V AA size batteries.
Complies with 21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice No. 50,
dated June 24, 2007
2