Simpson MSVK2723 Manuel D'utilisation page 8

WARNING: To reduce the risk of injury, read the pressure washer instruction manual and
the engine instruction manual before operating pressure washer.
Install the handle
a
Place handle onto
frame, depress
the snap buttons, and
slide the handle assembly
onto the frame until snap
buttons snap into place.
DANGER:
• Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust
contains carbon monoxide, an odorless and deadly gas.
• Risk of fluid injection and laceration. When using the high-pressure setting, DO NOT
allow the high-pressure spray to come in contact with unprotected skin, eyes or with
any pets or animals. Serious injury will occur.
Connect Garden
1
hose to Pump
Thread the garden
hose to the pump inlet.
See label #1 on unit.
qUICK SETUp GUIDE
Add/Check Oil
B
The engine is
shipped without
oil. Before starting engine,
add the oil provided.
Check oil level prior to
each use. Refer to Engine
Owner's Manual for
complete procedure.
qUICK START GUIDE
Connect high
2
Pressure hose to
Pump
Thread the high pressure
hose to the pump outlet
See label #2 on unit.
8- ENG
Add Gasoline
c
In a well ventilated
outdoor area
add fresh, high quality,
unleaded gasoline with
a pump octane rating
of 86 or higher. Do not
overfill. Wipe up spilled
fuel before starting the
engine. Refer to Engine
Owner's Manual for
complete procedure.
Connect high
3
Pressure hose to
Spray Gun
Thread the other end of
the high pressure hose
to the spray gun.