Publicité
Les langues disponibles
Les langues disponibles
1.
Pull quick-connect coupler (E) back and insert nozzle (K).
2.
Release quick-connect coupler and twist nozzle to
make sure it is secure in coupler.
WARNING: Flying object could cause risk of serious
injury. Ensure nozzle is completely inserted in quick-
connect socket and quick-connect collar is fully engaged
(forward) before squeezing gun trigger.
NOzzLE COLOR SpRAY pATTERN USES
Yellow
Green
White
Black
*NOTICE: The high pressure spray from your pressure washer is capable of
causing damage to surfaces such as wood, glass, automobile paint, auto striping
and trim, and delicate objects such as flowers and shrubs. Before spraying, check
the item to be cleaned to assure yourself that it is strong enough to resist damage
from the force of the spray.
HOW TO AppLY CHEMICALS/CLEANING SOLVENTS (FIG. 7)
Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use
only soaps and chemicals designed for pressure washer use. Do not use bleach.
To Apply chemicals
1.
Ensure detergent siphon hose (F, Figure 7) is
attached to barbed fitting location near high
pressure hose connection of pump as shown.
2.
Place other end of detergent siphon hose with
filter on it into container holding chemical/cleaning
solution. NOTE: For every 7 gallons of water
pumped 1 gallon of chemical/cleaning solution will
be used.
3.
Install low pressure (black) nozzle into quick connect fitting of spray wand, see
how To Use Spray Wand paragraph in this section.
15˚
25˚
40˚
low pressure
intense cleaning
of unpainted
hard surfaces
intense cleaning of
larger areas
cleaning of
painted or delicate
surfaces
applies cleaning
solutions
13 - ENG
k
E
SURFACES*
grills, driveways, concrete
or brick walkways,
unpainted brick or stucco
metal, concrete or wood
Auto/RV, marine, wood,
painted brick and stucco,
vinyl, painted siding
Low pressure
spray is safe on all
surfaces. Always verify
compatibility of cleaning
solution prior to use.
7
f
6
Publicité
