Audio Setting - Yamaha MCR-750 Mode D'emploi

SETUP MENU

Audio Setting

The default settings are marked with "
■ Audio Output
[HDMI]
You can select the output mode of the HDMI terminal.
*
Bitstream, PCM, Off
Notes
• To output sound from the speakers or headphones, select [Off].
• No sound of your iPod can be output from this unit to the TV
through the HDMI cable.
• To output HD audio (such as Dolby TrueHD or DTS-HD) from
the HDMI terminal, set [Video Out Select] to [HDMI Auto] or
more than [HDMI 720p] (p. 36).
[DRC]
You can set the DRC (Dynamic Range Compression)
(p. 49) to [On]/[Off]/[Auto]. When set to [Auto], DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
*
Off , On, Auto
■ Post Process
[UpMix]
You can multi-channelize the 2-channel audio signal
(effective on HDMI output). To multi-channelize, select
[DTS NEO:6], then select [Cinema] or [Music].
*
Off , DTS NEO:6
■ System Information
Software version and MAC address (p. 49) are displayed.
38
En
".
*