Publicité
Les langues disponibles
Les langues disponibles
3. Installation of the filter
Aim the end of the filter toward slot then push filter gently into slot.
Notes:
l Be sure to install the filter to side panel then for the filter to back panel.
l Install the filter with opposite direction of removal.
l Install the filter into place gently to avoid any damage to filter.
4. End of Season Storage
1) Screw off the drain cover and pull out the stopper to drain condensate water
completely. (Note: the tilt angle of the unit must be≦30
2) Keep unit running in fan mode for half day to dry inside of unit completely to prevent
from going moldy.
3) Turn off the unit, pull out plug then wrap the power cord around the wire-winding pillar,
insert the plug into the universal fixing hole at the back panel of the unit, install the
water stopper and drain cover.
4) Remove the heat exhaust hose assembly, clean and keep it properly.
Notes:
l Hold the exhaust hose assembly with both hands when removal.
l Push the fasteners aside on exhaust air outlet using your thumbs, then pull out exhaust
Lower filter frame
Push direction
Lower filter
Upper Filter frame
Upper Filter
Side filter
).
Side filter frame
Publicité
