Remote Control Box
Installation & Adjustment
1. Installation
Notes:
l Keep this mobile air-conditioner in upright position at least 2 hours before first
installation.
l This air-conditioner may be moved indoor conveniently; keep the unit in upright
position while moving it. The air-conditioner shall be placed at flat surface.
l Do not install or operate this air-conditioner in bathroom or other wet environments.
1) Installation of exhaust hose assembly and its adapter.
A. Take out the exhaust hose and its connector and adapter, to remove the plastic bag.
B. Extend one end of exhaust hose, screw the end without slot of round connector onto
it with anticlockwise direction at least 3 laps.
C. Extend another end of exhaust hose, screw the adapter onto it with anticlockwise
direction at least 3 laps.
Note: Screw round connector and adapter into right position, at least 3 laps, to keep
good connection of exhaust hose assembly.
Remote Control
Remote Control Hold direction
Open and Close Direction