Rotex RKRTR Manuel D'utilisation page 39

7
Press
8 Press
end time of this action.
Programming a day is finished
when the end time of the last
scheduled action is set to
You can quickly set the time to
 
by pressing
9
Press
Repeat step 6 till 9 for the next
10
scheduled actions of this day.
11 To program the remaining days, repeat above steps. Do
this for all days of the week.
Once
NOTE
programmed actions one by one and no additional
actions can be added.
You can clear a user-defined schedule again by
selecting it (
pressing
appears on the LCD to confirm the schedule is
cleared.
Your installer can link a custom schedule to cooling and heating
mode. Refer to "Setting up of codes in the installer menu" (code
‚ 
) in the installation manual.
RKRTR + EKRTETS
Room thermostat
4PW56108-1
to confirm.

or to adjust the
 
.
to confirm.
programmed
± ±
or
during 10 seconds. "
.
you can
should be flashing) and then
ƒœ‚ ±
only modify
ƒœ‚ ±
" or " "
Operation manual
14