Rotex RKRTR Manuel D'utilisation page 37

6.3. Manually overriding a schedule
There are 2 ways of overriding a schedule:
■ A temporary override in locked schedule timer mode (
Temporarily choose the comfort or reduced setpoint by
pressing 1 button only:
move.
• comfort setpoint:
• reduced setpoint:
■ A temporary override of the setpoint in schedule timer
mode
Press
0.5°C/0.5°F. Save a new, manual setpoint by pressing
by waiting 5 seconds.
J
is displayed.
Locking and unlocking the schedule timer mode is performed by
pressing . The locked schedule timer mode displays as
The unlocked schedule timer mode displays as
By default the manual override is active until the next
NOTE
scheduled action. You can change this behavior by
means of user code
then only be active for 1 hour. Refer to "Setting up
codes in the user menu" on page 16.
RKRTR + EKRTETS
Room thermostat
4PW56108-1
S J
and
Y J
and

or to modify the setpoint in steps of
or . The cursor "
are displayed.
are displayed.
$
‚ 
: the manual override will
Operation manual
5 5 5 5
)
;
" will
or
5
.
.
12