Rotex RKRTR Manuel D'utilisation page 38

6.4. Setting up a user-defined schedule (
Within the user-defined schedule each day can be programmed
individually and 12 actions (setpoints) are possible per day.
■ First decide upon the temperature scale you prefer
(°C/°F) by setting up code
"Setting up codes in the user menu" on page 16.
■ At all times you can press
Pressing
1
If needed, activate the advanced mode by pressing
during 5 seconds in OFF mode (
2
Navigate to the schedule timer setting menu (
pressing
3
Press
flashes and press
4
Press
day you want to program and
press
deselect it.
You can program multiple days at
once by selecting them.
5
Press
6
Press
setpoint of the first action.
The first action starts at
lasts until the end time which you
set up in the next step.
Operation manual
13
goes to the next step.
.
 ±
or until or
to confirm.
or to move to the

to select or
to confirm.

or to adjust the
 
± ± ± ±    
‚ 
as decribed in
to go back 1 step.
&
).
±
to
and
RKRTR + EKRTETS
± ± ± ±    
and )
(
) by
Room thermostat
4PW56108-1