Cleaning Agitator; Replacing Agitator - Panasonic MC-UG581 Manuel D'utilisation

Masquer les pouces Voir aussi pour MC-UG581:
Table des Matières

Publicité

For service questions, contact Panasonic at 1-800-211-7262.
For sales inquiries, contact Sylvane at 1-800-934-9194.
Card
Carte
Tarjeta

Cleaning Agitator

➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps.
➢ ➢ Reinstall agitator and lower plate.

Replacing Agitator

➢ ➢ When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
➢ ➢ Remove lower plate and agitator.
➢ ➢ Clean debris from end caps.
➢ ➢ Position belt over belt pulley on the
new agitator.
➢ ➢ Reinstall agitator and lower plate.
- 30 -

Publicité

Table des Matières
loading

Table des Matières