Denon AVR-1403 Mode D'emploi page 17

Before setting up the system
1
(Main unit) (Remote control unit)
2
3
NOTE:
Press the SYSTEM button again to finish system set up. System set up can be finished at any time. The changes to the settings made up to
that point are entered.
Setting the speaker configuration
1
2
NOTE:
• When "Small" has been selected for the front speakers, "Large" cannot be selected for the center speaker.
3
Check that all the components are correct, then press the POWER operation switch on the main unit or
the POWER button on the remote control unit to turn on the power.
Press the SYSTEM button to enter the setting.
*SYSTEM SET UP
NOTE: Please make sure the "AUDIO" position of the slide switch on the remote control unit.
Press the SELECT or (down) button to switch to the speaker configuration set up.
Use the (left) and (right) buttons to select your front speaker type.
1 FRONT
Press the SELECT or (down) button to switch to the center speaker setting.
Use the (left) and (right) buttons to select your center speaker type.
2 CENTER
Press the SELECT or (down) button to switch to the surround speaker setting.
Use the (left) and (right) buttons to select your surround speaker type.
3 SURR.
Press the SELECT or (down) button to switch to the subwoofer setting.
(Initial)
LARGE
LARGE
(left) button
(Initial)
LARGE SMALL
SMALL
(left) button
(Initial)
LARGE SMALL
SMALL
(left) button
ENGLISH
SMALL
(right) button
NONE
(right) button
NONE
(right) button
17