Gaggenau BS 470/471 611 Notice De Montage page 10

1 Push the appliance fully into the kitchen unit. Route
the Combi-steam oven's connecting cable and
supply and drain water hoses to the connection
points on the rear left in the kitchen unit.
Do not kink or jam connecting cables and hoses or
route them over sharp edges.
2 Align the appliance in the center.
An air gap of / " (5 mm) is required between the
3
16
appliance and adjoining furniture frontages.
10
3 Use a spirit level to align the appliance exactly
horizontally.
4 Fasten the appliance with the included
screw.Remove transportation lock from the door.
Adjusting the door
For precise alignment, the appliance door can be easily
adjusted.