Maintenance - Alto Clarke C2K 13 Mode D'emploi

Page -22 -

MAINTENANCE

WARNING: Maintenance must be done by
authorized personnel only.
CAUTION: Keep all adjustments according
to specifications.
Maintenance Instructions
Return the machine to a Clarke Authorized Service
Location every 12 months for maintenance inspections.
Switches
WARNING: All electrical repairs must be
done by authorized personnel only. The
machine must be tested after electrical
repairs to make sure it is safe to operate.
Disconnect the electrical plug from the
electrical outlet before doing any
electrical repairs.
The start and stop switch has an interlock which pre-
vents the contacts from being closed. If any part of the
switch is not operating, replace the part. If any part of the
electrical system of the machine is not operating or is
damaged, replace the part. Make sure all connections
are tight. Return the machine to the Clarke Service
Branch or a Clarke Authorized Service Center for electri-
cal repairs or testing.
Maintenance Of The Motor
Remove or blow dust and dirt from the motor frequently.
Other preventative maintenance is not needed by the
user is not needed on these parts.
If repairs to the gear unit or motor are needed, do not
disassemble the gears and motor. Return the machine
to the nearest Clarke Service Branch or Clarke Autho-
rized Service Center.
For safe operation, and longer life to your Clarke product,
use only Clarke parts.
NOTE: The grease (503802) for the gear box needs
to be changed every year. The C2K-13 require 8 oz.
of grease.
Maintenance Of The Brushes
Always remove the brush from the machine when not in
use. Keep brushes in a cool, dry location. Heat can
damage the bristles and the wood of some brushes.
Scrub brushes with bassine fibers must be put in water
for 16 hours to replace moisture and give the bristle a
longer life.
Clarke
Operator's Manual - C2K-13
®