Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Main parts
element
A
Grid for air passage
B
Combustion chamber door
C
Ashes drawer
D
Pellet cover
A
B
F
Description of operation
Ravelli Sphere pellet stoves are appliances for domestic heating powered by wood pellets with automatic loading. They are suitable
for use as a secondary heating system or as a support for the main heating system.
The heat generated by pellet combustion is diffused in the installation room thanks to the ventilation system as well as natural
radiation and convection. Two other rooms can be heated in the ducted versions.
The stove is controlled by an electronic control unit that manages the start-up, operation and shutdown phases and also includes
many other functions for control, programming and safety.
The user can choose the operating power from 5 levels, or set the temperature to be maintained in the rooms. In this case the sto-
ve will manage the power to ensure maximum comfort. Among the functions of the electronic control unit there is also that of being
able to program the stove's start-up and shutdown by setting the weekly chronothermostat.
All this can be done comfortably from the sofa using the handheld remote control.
⚠
Recharge the fuel
Use only wood pellets, the characteristics shown in this manual.
⚠
During pellet loading prevent the pellet bag from coming into contact with hot surfaces.
��
It is not recommended to empty the pellet bag directly into the hopper to avoid depositing wood sawdust on the bottom of
the hopper.
To load the pellets inside the hopper, proceed as described below:
step
1
Open the pellet hopper cover
2
Pour the pellets into the hopper.
3
Close the pellet hopper cover
Use and maintenance manual Sphere
E
Control panel
F
Combustion chamber
G
Grid for ashes
H
Brazier
24
23
22
21
20
T
D
R
P
N
M
L
K
H
J
H
G
F
E
D
C
C
B
A
24
23
22
21
20
19
18
17
16
15
14
G
E
19
18
17
16
15
14
Rev.1 10/03/2021
Pag.23
13
12
11
10
9
8
13
12
11
10
9
8
7
6
7
6
Publicité
Chapitres
Table des Matières
