Ravelli Sphere V Déco Manuel D'utilisation Et D'entretien page 165

Depending on the chosen settings, the following combinations are possible
Frontal ventilation
Right ducting
Left ducting
��
The TEMPERATURE and CUBATURE submenus cannot be accessed when in manual mode.
Temperature (automatic mode)
When automatic management is active, the power of the stove and the speed of the fans are automatically managed so that the desi-
red temperatures are reached and maintained in the rooms heated by the ducting. To use this function you must connect temperature
probes or external thermostats.
MENU
USER
TECHNICIAN
PRODUCER
Press the
"Access to menu"
key to access the
MENU screen
In the TEMPERATURE item, there is the following screen:
Use and maintenance manual Sphere
Use the "UP" and "DOWN" keys to change the distribution of hot air between right and
left ducting (the data is saved without further confirmation). You can choose from five
different positions.
To go back to the CANALIZED menu, press the "back" key.
Use the "confirm" button to switch to setting the distribution of the hot air in the ducting
(REAR)
To go back to the CANALIZED menu, press the "back" key once; to go back to the
Home screen, press the "back" key several times.
R.L.
R.L. - 0
Rear Left
from OFF to A from OFF to A
15% 40%
100% 85%
LOADING AUGER
CHRONOTHERMO-
SET AIR-PELLET
Press the
"confirm" key
to access the
USER screen
Use the "UP" and "DOWN" keys to modify the desired temperature in the room rooms
heated by the ducting (the data is saved without further confirmation).
To go back to the CANALIZED menu, press the "back" key.
Use the "confirm" button to go to the enable external thermostat item (ENABLE T.EXT.).
0
(Balanced)
from OFF to A
65%
65%
USER
CANALIZED
STAT
Press the
"confirm" key
to go to the item
CANALIZED.
Press the "decrease"
key to go to the item
TEMPERATURE
Rev.1 10/03/2021
Pag.44
R.R.
0 – R.R.
Rear Right
from OFF to A from OFF to A
85% 100%
40% 15%
CANALIZED
MANAGEMENT
TEMPERATURE
VENTILATION
CUBAGE
STATUS DISPLAY
TEMPERATURE
Press the
"confirm" key
to access the
screen