Epson Europe EB-1420Wi Guide D'installation page 43

a
Press the [ ] button on the remote control or the control panel to turn on the projector
t
Using the Remote Control
Caution
While projecting, do not put your face or hands near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
b
Change the aspect ratio of the projected image (only when necessary)
Project images from a connected device, and then press the [Aspect] button on the remote control.
Each time you press the button, the aspect name is displayed on the screen and the aspect ratio
changes.
Using the Remote Control
c
•
For details on connecting to devices and projecting images, see the Quick Start Guide.
•
The aspect ratio does not change when no images are being projected from the connected
device.
•
You can also change the aspect ratio from Signal - Aspect from the Configuration menu.
Projector's User's Guide - Configuration menu
s
Using the Control Panel
41
Installation Guide