Adjusting The Projected Image; Adjusting The Projection Position - Epson Europe EB-1420Wi Guide D'installation

Installation Guide
e
Connect the cables to the projector
Attach the Wireless LAN unit supplied to the wireless LAN unit's installation section.
c
•
Connect the power cord last.
•
When connecting to the Audio1, Audio Out, and Computer ports, we recommend connecting cables
to the ports in the following order: Audio1, Audio Out, and then Computer.

Adjusting the Projected Image

Follow the procedures below to adjust the projected image.
a

Adjusting the Projection Position (

b
Fine-tuning the Focus (
c
Calibrating the Pen (
Adjusting the Projection Position
• Do not make adjustments using the projector's Keystone function. Doing so may result in a reduction in image quality.
• When setting up multiple projectors using the batch setup function, perform this procedure before adjusting the
projected image.
s "Batch Setup Function"
p.40)
s
p.46)
s
p.47)
s
p.75
40