Epson Europe EB-1420Wi Guide D'installation page 35

b
Attach the template sheet to the wall
• Match the center line (
Confirm where the beams are within the wall, and shift the position left or right as necessary.
(The position can be shifted horizontally left or right from the center line of the projection surface up to a
maximum of 45 mm.)
• Match the height (
c
Determine the positions for the mounting holes for the wall plate
Secure the wall plate in at least three points.
• If securing the wall plate in four places, make the holes indicated by A or B in the figure.
• If securing the wall plate in three places, make the holes indicated by C in the figure.
Four mounting holes
) checked in step 1 to the Image Center line on the template sheet.
) checked in step 1 to the
33
line on the template sheet.
Three mounting holes
Installation Guide
[Unit: mm]