AEG FAVORIT 65000 VI Notice D'utilisation page 25

6.1 Adjusting the water softener
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
'SETTING AND STARTING A PRO-
GRAMME'.
2. Press and hold buttons (4) and (5) at
the same time until the indicators of
buttons (3), (4) and (5) flash.
3. Press button (3).
• The indicators of buttons (4) and
(5) go off.
Water hardness
French mmol/l
degrees
(°fH)
91 - 125 9.1 - 12.5
76 - 90 7.6 - 9.0
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicator of button (3) contin-
ues to flash.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the setting of
the water softener, e.g.
5.
4. Press button (3) again and again to
change the setting.
5. Deactivate the appliance to confirm
the setting.
ENGLISH
25
Water softener
adjustment
Manual Elec-
tronic
1) 10
2
1) 9
2
1) 8
2
7
1)
2
1) 6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1
= level