Publicité
Les langues disponibles
Les langues disponibles
b) First starting:
First cleaning
Before the 1st use, clean the machine (See 7.Cleaning and maintenance)
During the 1st use, warm up your oven during 30 min at 250°C. It can emit some
smoke for a while.
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged. If necessary, it has to be
replaced by the manufacturer, its after sale service or any qualified person to avoid
any risk.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of the oven :
Putting on
- Turn the temperature control to select the required temperature.
- Set the cooking time using the timer.
Stopping the appliance
- Place each control knob on 0
- The green pilot light switches off: the oven is off
- Disconnect the power cable.
- Clean the appliance. (see 7. Cleaning and maintenance)
d) Troubleshooting guide
Your oven does not work
Have you connected the power plug?
Have you checked your installation circuit breaker?
Is the timer on?
Is the cooking selector set to position O?
Is the pilot light on?
Your oven is giving off smoke
The cooking temperature is probably too high.
24
Publicité
