Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
(A) ANALOG INPUT SIGNAL INDICATORS
1.
SIGNAL / CLIP – Each LED lights green when the corresponding input channel receives an audio
signal. It turns red when the audio level is nearing 0dBFS (zero decibels full-scale – turn down
your input gain at this point).
(B) DAW CONTROL: CHANNELS
4
1.
CHANNEL FADER – This touch-sensitive, motorized fader adjusts the individual channel volume.
2.
MASTER – Controls the master fader in your DAW, if your DAW supports this feature.
3.
SELECT / REC / SOLO / MUTE – Affects the selected channel in your DAW.
4.
PREVIEW – Holding this button and manipulating another control allows you to see what this
control does without sending any information to your computer.
5.
< BANK > – Navigates through your software's audio channels in banks of eight.
6.
< TRACK > – Navigates through your software's audio channels one at a time.
1
3
3
3
3
1
6
5
6
2
Publicité
Table des Matières
