Charging Methods; Ac Charging Adapter - Wagan Tech SOLAR e POWER CUBE 1500 Guide D'utilisation

Solar e Power
• make Sure The Solar e Power Cube iS Fully Charged beFore FirST uSe.

CHARGING METHODS

Factory supplied equipment allows the Solar e Power Cube to be charged using:

AC Charging Adapter

AC Charging Adapter
The Solar e Power Cube is supplied with a fully automatic AC Charging Adapter. The indicator
light on the top of the adapter shows red when the battery is charging and green when the bat-
tery has reached a full charge. The charger will continue to trickle charge the battery to maintain
a full charge when the green light is on. The Charging Adapter has a wide range of input volt-
ages and automatically adjusts to 115V or 220V depending on the AC source. Note that initial
AC charge can take up to 24 hours. The AC Charging Adapter connects to the Solar e Power
Cube through either DC Accessory Outlet located on the control panel.
To charge the Solar e Power Cube using the AC Charging Adapter:
12
Cube 1500 by Wagan Tech®
™
DC Charging Adapter
(Charging from your
vehicle as you drive)
DC Plug DC Plug
Plug AC Charging Adapter into wall socket
www.wagan.com
Solar Panels
AC Wall Socket
LED Indicator