Cylinder Labeling Verbiage; Example Of Cylinder Manufacturer's Labeling Verbiage; Operating Instructions Operation - DeVilbiss Healthcare PD1000A Série Guide De L'utilisateur

Masquer les pouces Voir aussi pour PD1000A Série:

Mode d'emploi (32 pages)

Table des Matières

Les langues disponibles

Cylinder Labeling Verbiage

THIS CYLINDER IS TO BE USED WITH THE D

3% OXYGEN PRODUCED BY THE DeVILBISS iFILL PERSONAL OXYGEN STATION USING A PRESSURE SWING ADSORPTION

PRoCeSS.

OXYGEN CYLINDERS FILLED BY THE DeVILBISS iFILL PERSONAL OXYGEN STATION SHALL BE USED FOR PERSONAL USE ONLY.

"NOT TO BE FILLED FOR RESALE"

WARNING: HIGH PRESSURE OXIDIZING GAS VIGOROUSLY ACCELERATES COMBUSTION.

CAUTION: For medical applications. Use only as directed by a licensed practitioner. Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on

oxygen content of arterial blood, may be harmful.

CAUtion: DO NOT HANDLE CYLINDER OR USE CONTENTS UNTIL YOU ARE TRAINED TO USE CYLINDER AND CONTENTS, INCLUDING EMERGENCY PROCEDURES.

CAUtion: IMPROPER FILLING OR ABUSE OF THIS CYLINDER, OR FAILURE TO HEED THIS CAUTION MAY CAUSE SERIOUS INJURY OR LOSS OF LIFE. DO NOT ALTER OR MODIFY

CYLINDER OR RELATED COMPONENTS. KEEP OUT OF THE REACH OF CHILDREN. Secure cylinder during storage and use. No smoking in cylinder area. Turn the regulator or conserver

off after each use and when empty. Use in accordance with the DeVilbiss iFill Personal Oxygen Station instruction guide. Cylinder temperature should not exceed 130°F (54°C). Keep away from

heat, flame and spark. Do not drop.

"Use No Oil or Grease". KEEP CYLINDER, ALL EQUIPMENT AND CONNECTIONS FREE OF OIL AND GREASE TO AVOID VIOLENT IGNITION.

FILLING OF THIS GAS IS PERFORMED BY THE D

Cylinders that have been refinished and/or exposed to elevated temperatures must be hydrostatically tested before filling. Do not use caustic paint stripper or corrosive cleaners. Aluminum

cylinders subject to the action of fire or heated to temperatures in excess of 350°F (177°C) must be withdrawn from service and condemned by trained personnel. Valve and safety relief devices

must be removed and replaced by trained and authorized personnel. Do not alter or modify this cylinder in any way.

DO NOT REMOVE THIS PRODUCT LABEL

Not for Commercial Resale

Example of Cylinder Manufacturer's Labeling Verbiage

aLUMINUM HIGH PRESSURE GaS CYLINDER

Improper use, filling, storage, or disposal may cause personal injury, death, or property damage. Do not alter or modify this cylinder or valve in any way. Do not use caustic or corrosive cleaners.

Never fill this cylinder unless it has been hydrostatically tested. Only trained personnel should fill or service the cylinder. Only trained personnel should replace valves and pressure relief devices

and only with the complete assemblies containing the proper burst disc rating supplied by the valve manufacturer. Always secure cylinder in a cool dry area, out of reach of children. Do not

expose filled cylinder to temperatures above 130°F (54°C). Cylinders exposed to fire or heat in excess of 350°F (177°C) must be condemned. Cylinders refinished or subjected to elevated

temperatures must be hydrostatically tested prior to refilling. Do not remove, alter, or obscure this warning label. Proper cleaning of cylinder, valve, and components is required before filling with

oxidizing gasses such as oxygen and nitrous oxide.

Service, maintain and inspect cylinders in accordance with C.G.A. pamphlet C-1, C-6.1, G-4, G-4.1, G-4.3, P-1, P-2, P-2.5, P-14, and G-8.2 available from the CGA at ph. 703-788-2700 or web:

www.cganet.com

OPERaTING INSTRUCTIONS

Operation

Put bottle assembly on

Turn personal oxygen station

personal oxygen station.

"ON".

Apply cannula.

Turn rotary selector to desired

setting.

A-535-CYL

VILBISS iFILL PERSONAL OXYGEN STATION. THIS CYLINDER CONTAINS 93+/-