Bosch GWS 22-180 LVI Professional Notice Originale page 17

OBJ_BUCH-1528-003.book Page 17 Friday, August 19, 2016 12:27 PM
Action
Mounting the quick-clamping
nut
Dismounting the quick-clamp-
ing nut
Rotating the Main Handle
(GWS 24-180 LVI/
GWS 24-230 LVI/
GWS 26-180 LVI/
GWS 26-230 LVI)
Switching On and Off
Switching On and Off (country-
specific switch version without
lock-on function)
Working effectively with the
angle grinder
Grey-marked area: Handle
(insulated gripping surface)
Selecting the admissible
grinding tool
Selecting Accessories
Maintenance and Cleaning
 For safe and proper working, always keep the machine
and ventilation slots clean.
In extreme conditions, always use dust extraction as far
as possible. Blow out ventilation slots frequently and in-
stall a portable residual current device (PRCD). When
working metals, conductive dust can settle in the interior of
the power tool. The total insulation of the power tool can be
impaired.
Please store and handle the accessory(-ies) carefully.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Bosch Power Tools
Figure Please observe
6
7
8
9
10
11
12
13
–
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
English | 17
Page
255
255
256
256
256
257
257
257
258 – 259
1 609 92A 2CB | (19.8.16)