Sharp AY-XP9GHR Mode D'emploi page 11

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according to
the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
9
Heat
( 4¡C)
1
indoor temp.
(¡C)
the figures in ( ) are temperature settings
During operation, if the outdoor temperature changes, the temperature settings will automati-
cally slide as shown in the chart.
TIPS ABOUT INDICATOR PANEL
The indicator panel will change each time you press
the DISPLAY button in the following manner.
Room Temp. Lamp
Temperature
indicator
The room temperature is
displayed.
NOTES:
• The displayed temperatures are rough estimates and may vary from the actual temperatures.
• Temperature display ranges
Room temperature: 0°C ~ 40°C (
than 40°C)
Outdoor temperature: –9°C ~ 45°C (
higher than 45°C)
• is displayed during the first 60 seconds of operation while the temperatures are being
detected.
• Only the room temperature can be displayed for 5 seconds when the unit is not in operation.
• During SELF CLEAN operation, the indicator panel will display remaining time of the
operation. Room and outdoor temperature will not be displayed even if you press the
DISPLAY button.
0 10 18
Cool
( 4¡C)
Heat Dry
( )
( 3¡C)
Room Temp.
- ¡C
Heat
( ¡C)
Outdoor Temp.Lamp
The outdoor temperature
is displayed.
is displayed when less than 0°C and
is displayed when less than –9°C and
outdoor
(¡C)
8 34
temp.
Cool Cool
( 5¡C) ( 6¡C)
Temperature
indicator
E-9
DISPLAY
No display.
when higher
when