Glossary - VINCENT SP-T100 Manuel D'utilisation

Frequency response:
Nominal Output Power in Class A at 8Ω:
Nominal Output Power (RMS) at 8Ω:
Nominal Output Power (RMS) at 4Ω:
Input sensitivity:
Total Harmonic Distortion:
Signal to Noise Ratio:
Input Impedance:
AC power connection type:
Inputs:
Outputs:
Dimensions (W x H x D):
Weight:
Colour:
Tubes:
dB level
This is a way of describing any physical quantity;
it is a common measurement for signal voltages
and the volume. It is given in decibels (dB).
Alternating signal voltages below 1V (RMS) are
described as "line level" voltages, which are suit-
able as music signals for amplifier inputs. Inputs
on amplifiers (mostly represented by RCA sockets)
which are designed for signals on the CD player,
tape recorder, DVD player etc. are also referred to
as "line level inputs" or "high-level inputs". Thos
signal inputs must not be confused with inputs that
accept preamplified signals.
Input sensitivity
Term for the smallest average (RMS) input voltage
which causes the maximum output power at the
maximum volume setting on the amplifier.
Examples: 100 mV to 500 mV (Millivolts) on high
level inputs, 2 mV to 5 mV on the phono MM input
or 0.1 mV to 0.5 mV on the phono MC input.
TECHNICAL SPECIFICATIONS

GLOSSARY

20 Hz - 20 kHz ±0.5 dB
10 W
100 W
200 W
1.3 V
< 0.1% (1 kHz, 1 W)
> 97 dB
48 kΩ
230 V / 50 Hz
1x RCA Main Input mono
2 x 2 loudspeaker clamps
210 x 195 x 380 mm
15 kg
silver / black
1x 6Z4, 1x 6N6, 1x 6N1
RCA
RCA is the American name for a type of coaxial
connectors and sockets, originally the abbreviati-
on for "Radio Corporation of America", the name
of a United States company. Both the plug and
cable consist of a rod-shaped inner lead and a
cylindrical-shaped outer lead. This enables a
mono audio signal or a video signal to be trans-
mitted. Compared to the XLR plug connector, this
type of connection is also called "unbalanced
signal connection".
Vincent
31