Building-In - Zanussi ZBA 6154 Mode D'emploi

Building-in

Dimensions of the recess
ZBA 6154
Height of housing (1) 880
Depth of housing (2)
Width of housing (3)
PR0
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
50 mm
D526
For appropriate venting, follow indications in the
figure.
48
ZBA 6224
1225
550 550
560 560
3
1
2
min.
200 cm
2
mm
mm
mm
1. Fit the appliance in the niche by making sure that
it stands against the interior surface of the unit on
the side where the door hinges of the appliances
are fitted. Insert the appliance until the upper strip
butts up against the unit (1) and make sure that
the lower hinge is in line with the surface of the
unit (2).
2. Press in the joint covers between the appliance
and the kitchen furniture.
3. Open the door and push the appliance against the
side of kitchen furniture opposite to that of the
appliance hinges. Fasten the appliance with 4
screws (I) provided in the kit included with the
appliance.
D022
D132
I
1
2